PDA

View Full Version : Mineoro upgrade


Geo
06-08-2015, 07:31 AM
After 2 years with my modified Mineoro it is time to upgrade it. So i designed and constructed a new magnetic and electric field detector. At lab they works fine but i must connect them to detector and to check at field test.
I attach 2 photos from new pcbs

Regards :)

WM6
06-09-2015, 12:29 AM
Nice design, Geo.

Glad to see you on building remote modules again. Awaiting on your results report.

Geo
06-09-2015, 06:33 AM
Hi WM6.
Last year i had many succesful results with my lrls so i decided to try to make something better. With Mineoro type lrls the big problem is the moisture. Also an electric field detector maybe help it.
Today if will finish the upgrade at my mineoro clone will go for T.H and will inform you

Regards :)

reza vir
06-09-2015, 06:35 AM
Congratulations Geo
Good job making good
If metal is detected by a magnetic aura?

Geo
06-09-2015, 06:44 AM
At photo below is the electric field detector at front side of my Mineoro clone.

Geo
06-10-2015, 06:23 AM
Congratulations Geo
Good job making good
If metal is detected by a magnetic aura?

Old buried metals (no ferous) are detectable if the ground has not a lot of FeO and the moisture is low.

folharin
06-10-2015, 10:38 PM
congratulation!this is the way.

Geo
06-11-2015, 06:41 AM
Thanks.
Later i"ll post photos of the full project and results of the upgrading.
But.... all needs a very fine tuning :cool:

Geo
06-15-2015, 01:24 PM
Some photos of my updated "Mineoro type" with the extra E.F.D. I did not tried yet the new magnetic detector.

Nicolas
06-18-2015, 02:41 AM
Congratulations Geo. I hope you success

Geo
06-18-2015, 06:10 AM
Thank you. It worked very good with only the magnetic field detector and i connected an E.F.D for longer distance. I have not tried out to field yet.

BENZINAS
06-18-2015, 05:48 PM
nice work George , hope find something good very soon !!

indiana jones
06-19-2015, 06:28 PM
hello George nice work

Geo
06-19-2015, 08:39 PM
Hello christos. I am glad to see you again!!:)

rider
06-20-2015, 08:58 PM
:) :) Nice box !!!

Geo
06-21-2015, 06:29 AM
xaxaxa...
I never was good with wooden constructions.
But i am better with electronics :lol:

Regards Billy:)

ionios
06-25-2015, 09:08 PM
Good luck geo, i think you are making something
like artemis, the light it is IR ?.

Geo
06-25-2015, 09:22 PM
Hi.
No, it is a modified FG90 plus a EFD.
Light is a laser module for pinpoint on night. When there is signal, it lights...
When i"ll finish tests will replace the MFD.

brs
06-26-2015, 03:12 AM
Mr. Geo
Is this amendment to help others, or commercial

Geo
06-26-2015, 06:20 AM
It is personal.
It is difficult to mod a Mineoro FG90 because pcb is full of glue,
I constructed a new pcb and i added an electric field detector. It is under test yet