View Full Version : frequency for the cavity
ma330
07-21-2012, 11:37 PM
hi to all
I want to know is the frequency for the cavity in LRLS
tnx
hi to all
I want to know is the frequency for the cavity in LRLS
tnx
As lrl Do you mean the mfd (generator) or all the type of lrls??
ma330
07-22-2012, 08:34 AM
As lrl Do you mean the mfd (generator) or all the type of lrls??
mfd lrls
????????????
humhum
07-22-2012, 08:01 PM
Hi Geo , for cavity with MFD you which frequency use, or please write All use frequency for cavity.
Regards.
The exactly frequency is depended by the user.
It must be near to 10.050 Hz
:)
humhum
07-23-2012, 04:20 PM
The exactly frequency is depended by the user.
It must be near to 10.050 Hz
:)
Ok Geo ,very thanks I will try this freq. (as Hertz not Kilohertz),
and what it means ''The exactly frequency is depended by the user ''.
Ok Geo ,very thanks I will try this freq. (as Hertz not Kilohertz),
and what it means ''The exactly frequency is depended by the user ''.
Hi Humhum.
I mean that you must play a little with few hertz and to see when you locate the cavity better( better center). You can make tests from 10030 to 10070 Hz at steps of 1 or 2 Hz.
Good luck:)
What if your cavity resonate at 57Hz?
What if your cavity resonate at 57Hz?
No responce from lrods at this frequency:(
humhum
07-27-2012, 05:52 PM
What if your cavity resonate at 57Hz?
Hi WM6 ,Do you try this 57Hz for cavity with Lrods , and how is results?
humhum
07-27-2012, 06:01 PM
Hi Humhum.
I mean that you must play a little with few hertz and to see when you locate the cavity better( better center). You can make tests from 10030 to 10070 Hz at steps of 1 or 2 Hz.
Good luck:)
Ok Geo , With my Lrods I will try test for cavity , with 10Hz +,- steps of 1 or 2 Hz.
Best Regards.
Hi WM6 ,Do you try this 57Hz for cavity with Lrods , and how is results?
It is not problem to detect known cavities for me. Even without L-rods.
It is not problem to detect known cavities for me. Even without L-rods.
Can you tell us your way without l-rods?????
But maybe you have special detectors only for known cavities!!!!!!
humhum
08-02-2012, 12:06 PM
It is not problem to detect known cavities for me. Even without L-rods.
Hi WM6 , Can you send photos from your L-Rods .;)
Regards.
gwlwudi
08-03-2012, 02:54 AM
My frequency about 6K5,but I only search Long-buried copper,Can search fron 1 km away. VR1000 Circuit
My frequency about 6K5,but I only search Long-buried copper,Can search fron 1 km away. VR1000 Circuit
Do you know who is the output voltage???
gwlwudi
08-04-2012, 12:51 PM
Do you know who is the output voltage???
Hello,Geo
Above 555 constitute a step-up circuit, below 555, the control frequency output
gwlwudi
08-04-2012, 12:56 PM
I have done several tests, this circuit can be used, but there will be intermittent signal, I still do not understand how is it
Freelander
08-14-2012, 08:33 AM
Hi all,
Pls can you specify witch device do you use, that you can input the frequency value directly?
(Because I will build a Carl'MFD with knob connected to different capacitors values to change Hz.) I'm asking if there is more better solution.
You may buy a DDS generator from ebay and connect it to a power amplifier.
Good and cheap solution:cool:
Freelander
08-14-2012, 10:08 AM
Thanks Geo for answer,
You mean that is better device than the BasicMFD, I already start building this one and this make me hesitant :oh:
Freelander
08-14-2012, 06:02 PM
Thanks Geo for answer,
You mean that is better device than the BasicMFD, I already start building this one and this make me hesitant :oh:
I mean better use the DDS instead of the ICL8038 frequency generator to build developed MFD?
gwlwudi
08-15-2012, 01:47 AM
I mean better use the DDS instead of the ICL8038 frequency generator to build developed MFD?
DDS behind plus a power amplifier is the most simple and easy to use design
Freelander
08-16-2012, 10:11 AM
Ok, thank you friend, I will start my request in new post, to respect the sens of this topic.
reza vir
05-29-2013, 03:21 PM
Vacuum cavities are due to the accumulation of ions and holes have different frequencies in different situations.
1hz to 1mhz
Nicolas
07-12-2013, 03:21 AM
Vacuum cavities are due to the accumulation of ions and holes have different frequencies in different situations.
1hz to 1mhz
Yes my friend you have reason here the frequence to void is 300Hz to 1.8Mhz ..this with my LRL it's depend of cavity and the carbone Good knowledge
reza vir
07-17-2013, 06:58 PM
Yes my friend you have reason here the frequence to void is 300Hz to 1.8Mhz ..this with my LRL it's depend of cavity and the carbone Good knowledge
thanks my dear :)
Tim Williams
07-18-2013, 01:51 AM
If you are talking about sealed caves then you should check for CO2 and N2. Most sealed caves have bad air which is high levels of carbon dioxide and Nitrogen. If most of your cave have stalactites and stalagmites then you need to scan for CaCO3.
Research air in sealed caves or bad cave air. If you need the frequencies for the above I would need your location.
Tim
Nicolas
07-18-2013, 05:07 AM
If you are talking about sealed caves then you should check for CO2 and N2. Most sealed caves have bad air which is high levels of carbon dioxide and Nitrogen. If most of your cave have stalactites and stalagmites then you need to scan for CaCO3.
Research air in sealed caves or bad cave air. If you need the frequencies for the above I would need your location.
Tim
Thanks Tim good interference
give us a general rule of calculated frequency
suppose that place is the Greek
Tim Williams
07-18-2013, 10:22 AM
Location does not matter. If you want to try a test give me your country and city. I will calculate the frequency for CO2. In the USA they use co2 to carbonate soft drinks. If they do there you can take a liter bottle 1/4 full with top on tight and shake it to release gas. That will be the target. Ring theory is used for calculation and is proprietary.
Go to my site and download the EFNMR program. I will post the EFNMR frequency at 50000ut as reference. You can put it in the program and all can test if the want. The program will calculate the frequency. It's free.
Nicolas
07-18-2013, 05:16 PM
Location does not matter. If you want to try a test give me your country and city. I will calculate the frequency for CO2. In the USA they use co2 to carbonate soft drinks. If they do there you can take a liter bottle 1/4 full with top on tight and shake it to release gas. That will be the target. Ring theory is used for calculation and is proprietary.
Go to my site and download the EFNMR program. I will post the EFNMR frequency at 50000ut as reference. You can put it in the program and all can test if the want. The program will calculate the frequency. It's free.
Thank you tinm so much for this knowlege
But please where find your site???
I have this site
https://sites.google.com/site/nuclerone/the-science
and this site
http://www.ngdc.noaa.gov/ngdc.html
Cordially
Nicolas
Tim Williams
07-18-2013, 11:35 PM
Look here.
http://www.lrlman.com/efnmr.htm
Nicolas
07-19-2013, 12:30 AM
Look here.
http://www.lrlman.com/efnmr.htm
Thank you very much my dear Tim Williams
Tim Williams
07-19-2013, 03:37 PM
Here is the EFNMR frequency for CO2. 39.41827127
Don't forget to set your NT value in your area.
Nicolas
07-20-2013, 04:39 AM
Here is the EFNMR frequency for CO2. 39.41827127
Don't forget to set your NT value in your area.
Yes thanks Tim very much
Tim Williams
07-20-2013, 12:28 PM
You take the EFNMR value and edit the compound adding it. Then refresh the list. I'll try to post a link to a video of using the program.
Nicolas
07-20-2013, 12:53 PM
Here is the EFNMR frequency for CO2. 39.41827127
Don't forget to set your NT value in your area.
Ok my dear and I know your products. We can also work on developing apps if you wish my friend
https://plus.google.com/118224313508205379758/posts
Tim Williams
07-20-2013, 07:20 PM
Here is a video on the EFNMR program.
http://youtu.be/s4euSs6sdLo
Tim
Tim Williams
07-21-2013, 11:55 PM
Has anyone tested for CO2 yet? Please let me know how you do.
Has anyone tested for CO2 yet? Please let me know how you do.
Tim, who is the NMR frequency for NT45125??
I"ll try it soon and i"ll inform
:)
Tim Williams
07-22-2013, 12:16 PM
Geo are you asking me what is the frequency for CO2 for the NT value of 45125? Did you get that value from your location?
Geo are you asking me what is the frequency for CO2 for the NT value of 45125? Did you get that value from your location?
Hi Tim.
45.125 is the value of magnetic field at my city. So i need the EFNMR frequency for CO2.
How do you calculate it???
Regards:)
Tim Williams
07-22-2013, 01:05 PM
Geo I posted the EFNMR above post 169. Watch the video to use the program. If you still need me to tell you the frequency let me know. To check and see if you entered the NT value correctly, put 50000 in NT for reference and the frequency for CO2 should be 279.56220 hz
Nicolas
07-22-2013, 07:35 PM
Here is a video on the EFNMR program.
http://youtu.be/s4euSs6sdLo
Tim
Thank you Tim so much..And I have receive you Email
I would contact you soon as I told you
Geo I posted the EFNMR above post 169. Watch the video to use the program. If you still need me to tell you the frequency let me know. To check and see if you entered the NT value correctly, put 50000 in NT for reference and the frequency for CO2 should be 279.56220 hz
Ok Tim, i found it, thanks.
Can you tell me how much accurate must be the the frequency???
I can set the generator with one decimal of hertz, is it OK??
:)
reza vir
07-24-2013, 11:23 AM
hi to all
nmr frequency for gold 37 or 5 khz ?????
hi to all
nmr frequency for gold 37 or 5 khz ?????
At my city is 34.077 Hz
reza vir
07-30-2013, 09:44 AM
At my city is 34.077 Hz
very thanks dear geo
Tim Williams
08-02-2013, 01:57 AM
hi to all
nmr frequency for gold 37 or 5 khz ?????
In the earths field it's what the program says at the lat,log or zip.
All other frequencies would be harmonics. My program calculates the frequency down from NMR frequency on periodic tables.
Sites like this one.
http://www.eclipse.net/~numare/nsnmrpt.htm
Geo yes .1 is find.
goldfinder
08-04-2013, 02:51 AM
Location does not matter. If you want to try a test give me your country and city. I will calculate the frequency for CO2. In the USA they use co2 to carbonate soft drinks. If they do there you can take a liter bottle 1/4 full with top on tight and shake it to release gas. That will be the target. Ring theory is used for calculation and is proprietary.
Go to my site and download the EFNMR program. I will post the EFNMR frequency at 50000ut as reference. You can put it in the program and all can test if the want. The program will calculate the frequency. It's free.
This is nonsense! CO2 is throughout the planet. Anybody claiming to have a special frequency for CO2 at some location is full of H2S (that is rotten egg smell in case you don't know chemistry).:rolleyes:
Goldfinder
Tim Williams
08-04-2013, 03:06 AM
This is nonsense! CO2 is throughout the planet. Anybody claiming to have a special frequency for CO2 at some location is full of H2S (that is rotten egg smell in case you don't know chemistry).:rolleyes:
Goldfinder
http://www.forums.caves.org/viewtopic.php?f=1&t=8654
http://scholarspace.manoa.hawaii.edu/bitstream/handle/10125/1279/v44n3-207-218.pdf?sequence=1
http://www.caves.org/pub/journal/PDF/V68/v68n1-Baldini.pdf
http://www.cuevadenerja.es/archivos/publi_126_Carbon%20Dioxide...(Journal%20of%20Spele ology).pdf
If you want the frequency for H2S I have that too.
In the earths field it's what the program says at the lat,log or zip.
All other frequencies would be harmonics. My program calculates the frequency down from NMR frequency on periodic tables.
Sites like this one.
http://www.eclipse.net/~numare/nsnmrpt.htm
Geo yes .1 is find.
Thanks Tim:).
Maybe this week i"ll try the CO2
:)
http://www.forums.caves.org/viewtopic.php?f=1&t=8654
http://scholarspace.manoa.hawaii.edu/bitstream/handle/10125/1279/v44n3-207-218.pdf?sequence=1
http://www.caves.org/pub/journal/PDF/V68/v68n1-Baldini.pdf
http://www.cuevadenerja.es/archivos/publi_126_Carbon%20Dioxide...(Journal%20of%20Spele ology).pdf
If you want the frequency for H2S I have that too.
TIM, can you tell me how to calculate the frequency for mixed metals?? for example gold 22 karat.
Regards :)
Tim Williams
08-04-2013, 03:28 PM
TIM, can you tell me how to calculate the frequency for mixed metals?? for example gold 22 karat.
Regards :)
Geo there are a number of 22k alloys. Jewelry and coin for two. Different metals combined to make different color jewelry.
Look here for examples.
http://www.csudh.edu/oliver/chemdata/alloys.htm
Geo there are a number of 22k alloys. Jewelry and coin for two. Different metals combined to make different color jewelry.
Look here for examples.
http://www.csudh.edu/oliver/chemdata/alloys.htm
Hi Tim.
So in the case of different metals how we can calculate the frequency of metals.....
:)
Tim Williams
08-08-2013, 01:34 PM
Hi Tim.
So in the case of different metals how we can calculate the frequency of metals.....
:)
Geo the calculation is proprietary using ring theory.
Tim
Geo the calculation is proprietary using ring theory.
Tim
Thanks Tim.
I looked it but saw it difficult:angry:
Regards
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.