BIOnic 01 Schematic

[WM6]

Dr. Best New Year free Gift to all:

http://i19.servimg.com/u/f19/14/09/85/82/bionic10.jpg

[Geo]

Special gift:lol:
Thanks:)

[WM6]

After PM asked for better resolution schematic dr. Best give us some modified version:

http://i19.servimg.com/u/f19/14/09/85/82/bionic11.jpg

Eye contact lenses have to be +3.00 to 4.25 to correct prismatic effect.

[Geo]

I don't need better resolution. I worked with Bionic Alfa and i have personal experiment.
It don't work, so i believe the same and for bionic 1.

Regards:)

[WM6]

I don't need better resolution. I worked with Bionic Alfa and i have personal experiment.
It don't work, so i believe the same and for bionic 1.

Regards:)

You damm skeptic!

[Geo]

You damm skeptic!

Sorry, i don't understand the world "damm".
What are you mean??

[WM6]

Sorry, i don't understand the world "damm".
What are you mean??

Have to be damn not damm.

Mean something nice (since invalid) like:


δεκάρα
πεντάρα
ανάθεμα



καταδικάζω
καταρώμαι
διαβολοστέλνω
επικρίνω δριμύτατα

[Geo]

So, why i damnsceptic ?????
I say what i see. Problem is that when i see a lrl that don't work, sceptics are agree with me, otherway NOT:lol::lol::lol:

Regards:)

[Fred]

So, why i damnsceptic ?????
I say what i see. Problem is that when i see a lrl that don't work, sceptics are agree with me, otherway NOT:lol::lol::lol:

Regards:)
This is ironic. WM6 is a super damn sceptic :lol:

[GOLDENSKULL]

Hi WM6,

please tell us, where are you get this schematic of BIOnic 01 ?
explain to us how this work...

thanks...

[WM6]

Hi WM6,

please tell us, where are you get this schematic of BIOnic 01 ?
explain to us how this work...

thanks...



Hi Goldenskull,

schematic is intellectual property of dr. Best lab, but as his New Year Gift is free for private use.

I will ask dr. Best for some explanation of this bio refractometry gold photons method.

And, yes, two LEDs on left side are in fact one multicoloured LED.

[Esteban]

Hi WM6,

please tell us, where are you get this schematic of BIOnic 01 ?
explain to us how this work...

thanks...


Is a simple presumption. Sure is not the schematic of the Bionic 01.

[WM6]

Dr Best kindly give us some data about primary tunning:

To asure best refraction of gold photons this primary tunning is needed:

1. put P2 and P3 at middle position,

2. fix (glue) eye contact lenses in the middle position of both tubes,

3. both BP109 sensors have to be in sliding condition inside tubes, tunning is carried out by approximating the sensor closer and away from lenses until the associated red LED lights up most strongly.

4. After tunning fix (glue) sensor in tunned position.

Best refraction of gold photons can be achieved with a light blue tinted contact lenses. You cad add or subtract your ovn diopter from here suggested diopter, this mean bio refraction of gold photons.

As a laser pointer can be used any Red laser pointer (eg. from laser water scales). Red laser pointer can be supplied from sam source as main circuit by voltage adoption or from its own batteries.

Sensor tubes must be installed perfectly parallel with the laser pointer at a max distance, given by the formula:

max distance (mm) = U supply (V) x PI (3.14)

min distance (mm) = U supply (V)

PI mean here theoretical speed of golden photons calculated: 3.14x108 meters per second .

[WM6]

Is a simple presumption. Sure is not the schematic of the Bionic 01.



Hi Esteban

no one is saying that this is Bionic 01 schematic.

This is BIOnic 01 GOLDY schematic.

Bionic 01 is same as Mineoro - not working crap.

But all dr. Best projects are fully working and scientific based.

[GOLDENSKULL]

Hi WM6,

did you build this device... ?
please tell us more about BP109 sensors...
and what these sensors sens?
this device can detect gold under ground? from what distance?

[Fred]

In wich direction should i point the contact lenses ?

[J_Player]

In wich direction should i point the contact lenses ?I think you supposed to point the lens in the direction where you look for treasure.

Best wishes,
J_P

[nick_f]

PI mean here theoretical speed of golden photons calculated: 3.14x108 meters per second .
Hi WM6,

I am relieved to hear that finally the speed of light has been exceeded!From now on, the sky is the limit!

http://en.wikipedia.org/wiki/Speed_of_light


> max distance (mm) = U supply (V) x PI (3.14)

> min distance (mm) = U supply (V)

> PI mean here theoretical speed of golden photons calculated: 3.14x108 meters per second .

This must be revolutionary physics, at its best. I always thought that you have to add apples to apples.

So, a distance (m not mm) is equal to a Voltage (V) multiplied by a speed (in this case, PI = 3x10^8 m/s).

m = V x m/s ==> If we simplify, Volt = second! Wow, that calls for a Nobel Prize!

In the second equation, it is readily apparent! Meter = Volt! Quite amaizing how LRL can neglect conventional physics!


Regards,
Nicolae

[WM6]

So, a distance (m not mm) is equal to a Voltage (V) multiplied by a speed (in this case, PI = 3x10^8 m/s).

m = V x m/s ==> If we simplify, Volt = second! Wow, that calls for a Nobel Prize!

In the second equation, it is readily apparent! Meter = Volt! Quite amaizing how LRL can neglect conventional physics!



Hi Nicolae,

let's not be petty.

It is about special golden photons which characteristic do not suit To Wiki explanation.

Formula are correct in mm. Explanation term of PI are only in derivative mean. Some extra-sensing postulates we cannot understand by our simple scientific mind. You have to be more open minded to understand those lawfulness of nature.



did you build this device... ?
please tell us more about BP109 sensors...
and what these sensors sens?
this device can detect gold under ground? from what distance?



Not yet, it is build only by dr. Best, but I have serious intention to build a sample.

About BP109 you can read on web a lot more than I can to say you.

Sure it can detect gold underground, it is GOLDY machine, isn't? From what distance I cannot say exactly yet, but display of filigree we can easily detect from other site of street. I have photos of jewellery display as irrefutable evidence.


Quote:
Originally Posted by Fred
In wich direction should i point the contact lenses ?

I think you supposed to point the lens in the direction where you look for treasure.

Best wishes,
J_P



Very precise answer J_P.

Dr. Best is ready to offer you place a sales representative of BIOnic 01 Goldy for South America and Alaska.

[Fred]

I think you supposed to point the lens in the direction where you look for treasure.

Best wishes,
J_P
I asked this because i was wondering if the detection principle relied on gold plutons focused (by the lenses) on the photodiodes or if it was the photodiodes that were looking at the gold plutons.

[J_Player]

I asked this because i was wondering if the detection principle relied on gold plutons focused (by the lenses) on the photodiodes or if it was the photodiodes that were looking at the gold plutons.Hi Fred,
I was wondering the same thing. But after reading the math and WM6's explanation, It is obviously working by mutual precognition. This is an inherent property of the optics when exceeding the speed of light. Of course, time can reverse in these conditions, as well as distortions in space, which provides the key to the answer to your question.

Because these gold photons are traveling faster than the speed of light, you are able to detect the presence of gold before any of the slower gold ions can reach you. This is the exciting side benefit from this method.... there is there is no danger from massive gold ion migration. The gold ions cannot move as fast as the gold photons, so gold ions fall to the ground before arriving at the LRL. This means you are safe from the horrors of gold statue conversion. With some careful design, this new method will be able to deposit all the buried gold via ion migration techniques into a big heap of metal some distance in front of where you are holding the LRL. I think you won't need to carry a shovel.

But be sure to take your high top boots, in case the need arises. :rolleyes:

Best wishes,
J_P

[Esteban]

Hi WM6,

did you build this device... ?
please tell us more about BP109 sensors...
and what these sensors sens?
this device can detect gold under ground? from what distance?

Wild presumption... no operable.

[hung]

And then they have always claimed the LRL manufacturers are the ones who fool people...

Pretty clear who the real scammers are...

[WM6]

Wild presumption... no operable.



You know, you are factory of non operable devices.

All dr. Best project all fully operable, in contrary to your and Mineoro construction comics.

[WM6]

And then they have always claimed the LRL manufacturers are the ones who fool people...

Pretty clear who the real scammers are...



Should exist injustice and untruths towards working LRLs, I'll show up to debunker the big mouths

[Fred]

At last we have precise schematics.

Hung, you should go back to your religion and sci-fi novels - what you see here may hurt your sensitivity...

[Mechanic]

Hi Guys,

This is a truly novel invention. Thank you Dr.Best.

Now I have a question, If I were to use brown contact lenses in the device, would I be able to use it to find a large shifter which I dropped in a wheat field yesterday while I was fixing a tractor? I don't want it to sound off to all of the small gold particles buried deeply in the soil though:D

Cheers

[WM6]

With some careful design, this new method will be able to deposit all the buried gold via ion migration techniques into a big heap of metal some distance in front of where you are holding the LRL.

J_P

Hi J_P

Now, after your great interpretation of BIOnic 01 Goldy phenomena even Dr. Best understood what he was able to create.

But are you sure that big heap on picture is correct iriented NORTH - SUD?

[WM6]

Hi Guys,

This is a truly novel invention. Thank you Dr.Best.

Now I have a question, If I were to use brown contact lenses in the device, would I be able to use it to find a large shifter which I dropped in a wheat field yesterday while I was fixing a tractor? I don't want it to sound off to all of the small gold particles buried deeply in the soil though:D

Cheers

I think that contact lenses do not suit to tractor (due to small ionic chamber in tubes), but will ask dr. Best about such inventive solution.

[J_Player]

Hi Guys,

This is a truly novel invention. Thank you Dr.Best.

Now I have a question, If I were to use brown contact lenses in the device, would I be able to use it to find a large shifter which I dropped in a wheat field yesterday while I was fixing a tractor? I don't want it to sound off to all of the small gold particles buried deeply in the soil though:D

CheersIt would depend on whether the field is planted with whole wheat or white wheat. The brown lenses should work ok in a whole wheat field. Otherwise you would get better results using clear lenses.

Best wishes,
J_P

[J_Player]

Hi J_P
Now, after your great interpretation of BIOnic 01 Goldy phenomena even Dr. Best understood what he was able to create.

But are you sure that big heap on picture is correct iriented NORTH - SUD?Hi WM6,
In the Dr. Best adaptation, it does not matter if the orientiation is NORTH - SUD or NORTH - SOUTH, or not even NORTH. Any direction should work.

The image above came from my science text book, and is a bit dated from the days when readers used antique LRLs that cannot be built to work properly from the information posted in this forum. See the new image corrected for the modern Dr. Best LRL using advanced warp speed optics and ion migration methods below:

[WM6]

Today dr. Best post to us some more detailed explanations regarding Ionic chambers in tubes.

To achieve better results through faster gold ions ignition, it is better to push inside tubes between contact lenses and sensors (ionic chamber) some kind of gas insteed of air. All gases work fine, body gases too.

http://i19.servimg.com/u/f19/14/09/85/82/bionic13.jpg

[J_Player]

And then they have always claimed the LRL manufacturers are the ones who fool people...

Pretty clear who the real scammers are...I make no claims manufacturers are fooling people. The Dr. Best LRLs work on well known principles shown on working LRL web pages, and incorporate the latest technology derived from gold DNA and the substance it produces, as well as shot signal lines returning. This latest adaptation operates well outside the standard Maxwell Heaviside concept to allow reverse gauss to function properly when transporting metal ions through some distance in the air.

If you can show you have a better schematic, let's see it.

Best wishes,
J_P

[Theseus]

And then they have always claimed the LRL manufacturers are the ones who fool people...

Pretty clear who the real scammers are...

Not claimed. It is a fact. LRL manufacturers ARE the real scammers.

Just because there are a few who vocalize (and expose) those manufacturers, cutting into their profits - does not in any way make that faction scammers.

Ask yourself Hung! Are the vocal ones taking money from innocent, gullible and technically-challenged people in order to finance their own retirement plan and bolster their bank account? :nono:

[Fred]

To achieve better results through faster gold ions ignition, it is better to push inside tubes between contact lenses and sensors (ionic chamber) some kind of gas insteed of air. All gases work fine, body gases too.
Great information!
I will try with 2 parts of oxygen and one part of hydrogen...

[WM6]

Great information!
I will try with 2 parts of oxygen and one part of hydrogen..

.

Fine, You can, but take care, as they can not be mixed with each other, otherwise golden photons can be too much oxidized and no sparkling occured .

[goldfinder]

Only BP109 I could find was a large (compared to WM6 schematic) UV through IR spectrum (250 NM to 1100 NM). Certainly Dr. Best is feeding us more POOPOO.

IR is worthless to detect as it is simply a heat sensor. UV more Dr. BS.

goldfinder

[ivconic]

Only BP109 I could find was a large (compared to WM6 schematic) UV through IR spectrum (250 NM to 1100 NM). Certainly Dr. Best is feeding us more POOPOO.

IR is worthless to detect as it is simply a heat sensor. UV more Dr. BS.

goldfinder

Ehhh! You can hurt Esteban's feelings! Spitting like that on IR !!! :lol:

[J_Player]

Hi WM6,
The only contact lenses I could find have UV filters in the lens material.
Will these lenses work ok for the BIOnic 01 Goldy?

Best wishes,
J_P

[oz neil]

Desparate to find field service information for OKM Future 2005. Can Anyone suggest a source?

[WM6]

Hi WM6,
The only contact lenses I could find have UV filters in the lens material.
Will these lenses work ok for the BIOnic 01 Goldy?

Best wishes,
J_P

Thanks for reminde me J_P, contact lenses should be soaked in hygroskopic liquid like CH3CHOHCH2OH for 11 minutes (coolant or antifreeze for the car works fine).

[WM6]

Only BP109 I could find was a large (compared to WM6 schematic) UV through IR spectrum (250 NM to 1100 NM). Certainly Dr. Best is feeding us more POOPOO.

IR is worthless to detect as it is simply a heat sensor. UV more Dr. BS.

goldfinder

Hi goldfinder

what is wrong with wideband light sensor? This is ideal solution which eliminate all disturbances cause of ionic chamber in tube.

I can give you solid evidence how BIOnic 01 GOLDY is working.
Look at picture: this jewellery window display was infallible detected from other side of street (from about 37 meters):

http://www.dsplays.co.uk/images/03.jpg

What sort of proof do you need more?

[Leto]

Thanks for reminde me J_P, contact lenses should be soaked in hygroskopic liquid like CH3CHOHCH2OH for 11 minutes (coolant or antifreeze for the car works fine).

Also would need focal length of lenses.. for nearsighted or shortsighted :???:

[Fred]

I have tried with two parts of hydrogen and one part of oxygen (already combined) and it worked very well, but for a short time.

[J_Player]

Thanks for reminde me J_P, contact lenses should be soaked in hygroskopic liquid like CH3CHOHCH2OH for 11 minutes (coolant or antifreeze for the car works fine).Hi WM6,
I put my contact lenses in the radiator of my car to soak them 11 minutes in very warm CH3CHOHCH2OH solution. I lost one of the contact lenses. I think it is at the bottom of the radiator. But I can find another to replace it.

Now for a new question: How can I modify the BIOnic 01 Goldy to locate my lost shovel? If I search for a lost shovel, I think the steel in the shovel blade may upset the magnetic field and interfere with the principles of reverse gauss. But I did see a video of a similar locator finding a shovel at long range. How can I use the Dr. Best Goldy to find my lost shovel?

Best wishes,
J_P

[Fred]

Hi WM6,
I put my contact lenses in the radiator of my car to soak them 11 minutes in very warm CH3CHOHCH2OH solution. I lost one of the contact lenses. I think it is at the bottom of the radiator. But I can find another to replace it.

Now for a new question: How can I modify the BIOnic 01 Goldy to locate my lost shovel? If I search for a lost shovel, I think the steel in the shovel blade may upset the magnetic field and interfere with the principles of reverse gauss. But I did see a video of a similar locator finding a shovel at long range. How can I use the Dr. Best Goldy to find my lost shovel?

Best wishes,
J_P
I am sorry to hear about you contact lens JP;
I am sure WM6 can ask Dr Best to send you a special filter plug-in that will reject the iron signal of your showel and will only detect the wood plutons emanations.(you can call it gauss)

[J_Player]

I am sorry to hear about you contact lens JP;
I am sure WM6 can ask Dr Best to send you a special filter plug-in that will reject the iron signal of your showel and will only detect the wood plutons emanations.(you can call it gauss)But My shovel has a fiberglass handle. Not wood. I think this is the reason it is missing. Maybe a jealous skeptic took it to see if it will recover treasure better than his wood handle shovel.

The problem is I can no longer recover buried treasure unless I take my dog, "Spot" along with me to do the digging. I will need to use the Dr. Best Goldy to find my lost shovel because other long range shovel locators are too expensive. I will try to retrieve my contact lens from the car radiator for now, and I will wait for the proper modification to the goldy locator to locate my lost shovel.

Best wishes,
J_P

[WM6]

Also would need focal length of lenses.. for nearsighted or shortsighted :???:



Hi leto,

focal lenght fo shortsighted have to be as near as possible to 3.14. Mean in standard focal lenght you use 3.25 diopter and and hold the device near the tip of the nose.




I have tried with two parts of hydrogen and one part of oxygen (already combined) and it worked very well, but for a short time.



Very inventive again Fred, but this mixture suit better to next dr. Best LRL under product name: Mini nuclear fusion LRL.






How can I use the Dr. Best Goldy to find my lost shovel?



Please J_P, dont do this, Goldy is highly dedicated machine, only for gold. But dr. Best appreciate your very valued contribution in LRL developmet and are willing to construct special ions chamber for diferent type of lost shovels only for you.

[nelson]

Hi does anyone know were i can get the BP-109 phototransistor or any replacemente.
Here in my town i can get BPX 38-2/3, but i don`t know if will work for this project and also if is a god one.
Regards
Nelson



After PM asked for better resolution schematic dr. Best give us some modified version:

http://i19.servimg.com/u/f19/14/09/85/82/bionic11.jpg

Eye contact lenses have to be +3.00 to 4.25 to correct prismatic effect.

[WM6]

Hi does anyone know were i can get the BP-109 phototransistor or any replacemente.
Here in my town i can get BPX 38-2/3, but i don`t know if will work for this project and also if is a god one.
Regards
Nelson

Hi Nelson

BPX38 can be adequate replacement for BP109. You can try to replace BP109 by any NPN photo-transistor for general use which cover red light spectrum of about 666nm wavelength.
By BPX38 you can use even green (about 525nm) laser pointer too, which is way better than red laser pointer.

For better sensitivity to 24 carat gold and orgone effect it is suggested to take in consideration The Golden Ratio
(The golden ratio or divine ratio is about 1.618033988749894848204586834365638117720309180... ).
In this case distance between laser pointer body and tube have to be 1.6cm tube diameter not more than 1.6cm and tube length (1.6 x 3.14) cm.

[nelson]

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson


Hi Nelson

BPX38 can be adequate replacement for BP109. You can try to replace BP109 by any NPN photo-transistor for general use which cover red light spectrum of about 666nm wavelength.
By BPX38 you can use even green (about 525nm) laser pointer too, which is way better than red laser pointer.

For better sensitivity to 24 carat gold and orgone effect it is suggested to take in consideration The Golden Ratio
(The golden ratio or divine ratio is about 1.618033988749894848204586834365638117720309180... ).
In this case distance between laser pointer body and tube have to be 1.6cm tube diameter not more than 1.6cm and tube length (1.6 x 3.14) cm.

[Leto]

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson

Nelson, Nelson....
how can I say this... this project will work only on northern hemisphere (this is where WM6 resides)..
For your part of the world you need complementary transistors, reverse power supply, etc. As I understand Dr. Best does not want his work to be copied by known south-america quasi LRL factories..
Also I tried soaking the lenses in antifreeze but the results are not so good.. Better using Freds hydrogen-oxygen combination.. or maybe nitrogen peroxide with RP-1 (refined Petroleum). I would give everything for good liter of C-stoff now.
So Nelson you can try it, but I predict you'll get only randomized flashes from the device in your part of the world.. sorry

[WM6]

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson

Hi Nelson

1. You can use any normal red laser pointer (better one with stronger laser beam). Even better green laser pointer. All are covered by your photo transistor.

2. Spider question. I think you can use lenses with different optic measure, bacause of separate tunnig both sensor.

3. There was some interest at PM here, but I dont know in which phase are their projects now.

Wish you DIY succes and have a great time with your GOLDY.

[WM6]

Nelson, Nelson....
how can I say this... this project will work only on northern hemisphere (this is where WM6 resides)..
For your part of the world you need complementary transistors, reverse power supply, etc. As I understand Dr. Best does not want his work to be copied by known south-america quasi LRL factories..
Also I tried soaking the lenses in antifreeze but the results are not so good.. Better using Freds hydrogen-oxygen combination.. or maybe nitrogen peroxide with RP-1 (refined Petroleum). I would give everything for good liter of C-stoff now.
So Nelson you can try it, but I predict you'll get only randomized flashes from the device in your part of the world.. sorry

Thank you for help Leto.

I hope that your clarification helped many people to a more serious reading this thread.

[J_Player]

Hi Nelson

1. You can use any normal red laser pointer (better one with stronger laser beam). Even better green laser pointer. All are covered by your photo transistor.

2. Spider question. I think you can use lenses with different optic measure, bacause of separate tunnig both sensor.

3. There was some interest at PM here, but I dont know in which phase are their projects now.

Wish you DIY succes and have a great time with your GOLDY.Hi WM6,

After problems with focusing contact lenses that I treated with warm CH3CHOHCH2OH solution, I read your explanation of gold color frequencies. I also read online how gold reflects another color we cannot see much better than the red and orange colors. Gold is an excellent reflector of Infrared light. Fortunately, we can find some very strong infrared lasers, and also infrared sensors. So I am changing the laser and phototransistors for infrared.

But I find also the lenses no longer have the same focus when changing to infrared. IR light requires the focal length be changed by a small amount depending on what infrared frequency is used. It is with great surprise I see the warm CH3CHOHCH2OH lens treatment resulted in perfect focus of the IR reflection. I will take additional measures to insure I maintain the correct power supply polarity and PN junction arrangement for northern latitude usage.

Best wishes,
J_P

[WM6]

Hi WM6,

After problems with focusing contact lenses that I treated with warm CH3CHOHCH2OH solution, I read your explanation of gold color frequencies. I also read online how gold reflects another color we cannot see much better than the red and orange colors. Gold is an excellent reflector of Infrared light. Fortunately, we can find some very strong infrared lasers, and also infrared sensors. So I am changing the laser and phototransistors for infrared.

But I find also the lenses no longer have the same focus when changing to infrared. IR light requires the focal length be changed by a small amount depending on what infrared frequency is used. It is with great surprise I see the warm CH3CHOHCH2OH lens treatment resulted in perfect focus of the IR reflection. I will take additional measures to insure I maintain the correct power supply polarity and PN junction arrangement for northern latitude usage.

Best wishes,
J_P

Hi J_P

yes infrared was Ultimate De Lux version of GOLDY. Its drawback is only that we need for observation of beam night vision googles which is not really cheap:

http://www.atncorp.com/night_vision_images/products/184/images/big/02.jpg

[J_Player]

Hi J_P

yes infrared was Ultimate De Lux version of GOLDY. Its drawback is only that we need for observation of beam night vision googles which is not really cheap:

http://www.atncorp.com/night_vision_images/products/184/images/big/02.jpgOf course, not cheap, but well worth the money. Anyone wearing these stylish glasses at the beach will be seen as a very "cool dude" who likes only the best things (and we know Dr. Best sells only the best things).

Best wishes,
J_P

[WM6]

Of course, not cheap, but well worth the money. Anyone wearing these stylish glasses at the beach will be seen as a very "cool dude" who likes only the best things (and we know Dr. Best sells only the best things).

Best wishes,
J_P

The best of the best sell dr. Best only to Army and is not for civil use:

http://www.atncorp.com/night_vision_images/products/804/images/big/03.jpg

For use togheter with "Goldy" now for Army use renamed in TERRY 007 (to detect Terrorist with gold in teeth ring or piercing).

[Fred]

Hi J_P

yes infrared was Ultimate De Lux version of GOLDY. Its drawback is only that we need for observation of beam night vision googles which is not really cheap:

http://www.atncorp.com/night_vision_images/products/184/images/big/02.jpg

Hi WM6,
You really look cool on this photo.I can see you only have the best.
Are you married?

I send you here a picture of myself.
You can understand why LRL doesn´t work with very well with me.But you can use me as LRL target if you want:
10932

[J_Player]

The best of the best sell dr. Best only to Army and is not for civil use:

http://www.atncorp.com/night_vision_images/products/804/images/big/03.jpgOk,
I will build the free project schematic with phototransistors changed to IR sensors.
The project also has two sensors with chemical treated lenses. So maybe it is detecting the same as the military version.

I also made another experiment.... I discover I can locate a gold ring at more than 10m without using laser or photosensor electronics.
Plain eyes can locate the gold ring at this distance.

Best wishes,
J_P

[WM6]

Plain eyes can locate the gold ring at this distance.




Yes, but this is so cheap and not funny.




Are you married?



Almost.

Nevertheless, I will take your great picture in my lab for gold target testing..

[Qiaozhi]

Get me out of here. :shocked:

[WM6]

Get me out of here.

:shocked:

You dont like Freds picture?

[nelson]

San to heard that Leto.
Anyway i will look forward for any news about remote sensing that really can work here in Chile.
Kind regards
Nelson



Nelson, Nelson....
how can I say this... this project will work only on northern hemisphere (this is where WM6 resides)..
For your part of the world you need complementary transistors, reverse power supply, etc. As I understand Dr. Best does not want his work to be copied by known south-america quasi LRL factories..
Also I tried soaking the lenses in antifreeze but the results are not so good.. Better using Freds hydrogen-oxygen combination.. or maybe nitrogen peroxide with RP-1 (refined Petroleum). I would give everything for good liter of C-stoff now.
So Nelson you can try it, but I predict you'll get only randomized flashes from the device in your part of the world.. sorry

[nelson]

I got the picture and thanks WM6 for your time.
Regards
Nelson



Hi WM6,

After problems with focusing contact lenses that I treated with warm CH3CHOHCH2OH solution, I read your explanation of gold color frequencies. I also read online how gold reflects another color we cannot see much better than the red and orange colors. Gold is an excellent reflector of Infrared light. Fortunately, we can find some very strong infrared lasers, and also infrared sensors. So I am changing the laser and phototransistors for infrared.

But I find also the lenses no longer have the same focus when changing to infrared. IR light requires the focal length be changed by a small amount depending on what infrared frequency is used. It is with great surprise I see the warm CH3CHOHCH2OH lens treatment resulted in perfect focus of the IR reflection. I will take additional measures to insure I maintain the correct power supply polarity and PN junction arrangement for northern latitude usage.

Best wishes,
J_P

[Fred]

Get me out of here. :shocked:
:lol::lol:

Running away from such a... treasure ??

[epitopios]

You damm skeptic!

you also wrote :

Have to be damn not damm.

Mean something nice (since invalid) like:


δεκάρα
πεντάρα
ανάθεμα σε




καταδικάζω
καταρώμαι
διαβολοστέλνω
επικρίνω δριμύτατα



so , be careful when you explain in Greek , sometimes its like boomerang

friendly , epitopios

[Qiaozhi]

:lol::lol:

Running away from such a... treasure ??
OK - I'm back. :ninja:

[WM6]

so , be careful when you explain in Greek , sometimes its like boomerang

friendly , epitopios

Agree epitopios (even I don't know Greek)

but as I said: Mean something nice (since invalid) like:

So all, that could mean something bad, is off.

[WM6]

I got the picture and thanks WM6 for your time.
Regards



Hi Nelson

So called Tyndall effect was used here. Tyndall effect was widely used to detect existence and concentration of silver and gold nano-particles in solutions but can be used in air too. To establish Tyndall effect we use laser of different colour spectrum, depending of particle size which can be from ions to some nm. Green light laser pointer are most powerful but not suitable to all nano-particles diameter and all metals. Red light laser pointer are suitable in general. So, the best solution would be fitting more laser pointer of different light spectrum stocked at device. Sensors and electronic remain unchangeable. With this device we are looking for flocks of ions over soil after sunset, not at the sunlight.

You can read more about Tyndall effect on web e.g. here:

http://www.silvermedicine.org/colloidal-silver-ppm.html
or here
http://www.scienceinschool.org/print/656

And here citation from site: http://mysite.du.edu/~jcalvert/phys/colloid.htm:
Sols that contain inorganic particles, such as metals, are mostly lyophobic, as are most aerosols and solid sols. Lyophobic hydrosols are a very common kind of colloid, and deserve detailed description. For example, consider the hydrosol of gold with particles about 4 nm in size. This was one of the first sols studied extensively, and has interesting properties. With about 0.1% gold, the sol is a rich ruby red. The similar solid sol in glass makes ruby glass. The gold particles absorb strongly in the green and blue, so the transmitted light is red. There is a little yellow-green scattered light, but mostly it is a case of absorption by the gold metal. If the gold particles clump together, which they may do as time passes, the color of the solution changes. When the particles are about 40 nm in diameter, the solution is blue, with considerable scattered light. If the particles agglomerate further, the color disappears and gold flakes settle out.

[nelson]

THanks a lot WM6, i will look forward for information related to the subject we are concerning about.
Regards
Nelson


Hi Nelson

So called Tyndall effect was used here. Tyndall effect was widely used to detect existence and concentration of silver and gold nano-particles in solutions but can be used in air too. To establish Tyndall effect we use laser of different colour spectrum, depending of particle size which can be from ions to some nm. Green light laser pointer are most powerful but not suitable to all nano-particles diameter and all metals. Red light laser pointer are suitable in general. So, the best solution would be fitting more laser pointer of different light spectrum stocked at device. Sensors and electronic remain unchangeable. With this device we are looking for flocks of ions over soil after sunset, not at the sunlight.

You can read more about Tyndall effect on web e.g. here:

http://www.silvermedicine.org/colloidal-silver-ppm.html
or here
http://www.scienceinschool.org/print/656

And here citation from site: http://mysite.du.edu/~jcalvert/phys/colloid.htm:
Sols that contain inorganic particles, such as metals, are mostly lyophobic, as are most aerosols and solid sols. Lyophobic hydrosols are a very common kind of colloid, and deserve detailed description. For example, consider the hydrosol of gold with particles about 4 nm in size. This was one of the first sols studied extensively, and has interesting properties. With about 0.1% gold, the sol is a rich ruby red. The similar solid sol in glass makes ruby glass. The gold particles absorb strongly in the green and blue, so the transmitted light is red. There is a little yellow-green scattered light, but mostly it is a case of absorption by the gold metal. If the gold particles clump together, which they may do as time passes, the color of the solution changes. When the particles are about 40 nm in diameter, the solution is blue, with considerable scattered light. If the particles agglomerate further, the color disappears and gold flakes settle out.

[WM6]

THanks a lot WM6, i will look forward for information related to the subject we are concerning about.
Regards
Nelson



For near to target detection is better to use red light laser pointer. As we know from quantum theory under shinning light electrons are ejected from the surface and can create new molecula which can be detected and wrongly interpreted (especialy by electrostatic detectors combined with laser in vicinity detection). Only red light will not cause the ejection of electrons from surface, no matter what the intensity of laser beam!

[nelson]

Ok and thanks a lot WM6.
NOw i have to deal with the use of this device in South America.
Kind regards
Nelson


For near to target detection is better to use red light laser pointer. As we know from quantum theory under shinning light electrons are ejected from the surface and can create new molecula which can be detected and wrongly interpreted (especialy by electrostatic detectors combined with laser in vicinity detection). Only red light will not cause the ejection of electrons from surface, no matter what the intensity of laser beam!

[WM6]

Anyway i will look forward for any news about remote sensing that really can work here in Chile.
Kind regards
Nelson



Hi Nelson, are you ok?

[nick_f]

For near to target detection is better to use red light laser pointer. As we know from quantum theory under shinning light electrons are ejected from the surface and can create new molecula which can be detected and wrongly interpreted (especialy by electrostatic detectors combined with laser in vicinity detection). Only red light will not cause the ejection of electrons from surface, no matter what the intensity of laser beam!
I've heard some people obtained good results with the ultrared light, from laser pointers with 25W power. Some good results, but not as good can be obtained with infrablue laser light, especially if fitted with a red congo filter. The first method can identify only superatomic quantum molecules of gold that have a content of 4.2545% of crystaline silver. The second method works better if the gold alloy is in proportion of maximum 0.000042334 %.

Can anybody else confirm if they got the same results?

Regards,
Nicolae

[nick_f]

Hi Esteban

no one is saying that this is Bionic 01 schematic.

This is BIOnic 01 GOLDY schematic.

Bionic 01 is same as Mineoro - not working crap.

But all dr. Best projects are fully working and scientific based.

I can vouch for Dr Best. We've been together to NA meetings for many years. In the last week his use of cocaine, heroine and speed has been reduced dramatically.

Regards,
Nicolae

[Geo]

I can vouch for Dr Best. We've been together to NA meetings for many years. In the last week his use of cocaine, heroine and speed has been reduced dramatically.

Regards,
Nicolae

Very Bad....:frown:

[WM6]

Can anybody else confirm if they got the same results?



Confirmed as the same results.




In the last week his use of cocaine, heroine and speed has been reduced dramatically.



Heroine or not, he stay to be our hero anyway.

[nelson]

Hi WM6, and many thanks for your concern about me.
Yes we are fine here after the most terrible earthquake and tsumami that afected our country.
While i live in the capital city of Santiago, Chile, that was hit by an earthquake of 8.5 Richter scale, other cities to the South of Santiago was hit by an 8.8 Richter scale, followed by Tsunamies in many places.
Authorities don´t know exactly the number of people dead or lost jet.
I have lots of things to do has a hamradio operator by the days.
Basic servicies are still down, fortunally i have water and electricity. No internet jet, while i m writing from my ofice now.

Well my friend, take cara and thanks for your note.

Kind regards

Nelson

ce3llp@mi.cl

Hi Nelson, are you ok?

[Esteban]

Hi Nelson!

Really big disaster occurs in Chile. I'm happy you can help the people.

Best regards

Esteban

[WM6]

Hi WM6, and many thanks for your concern about me.
Yes we are fine here after the most terrible earthquake and tsumami that afected our country.
While i live in the capital city of Santiago, Chile, that was hit by an earthquake of 8.5 Richter scale, other cities to the South of Santiago was hit by an 8.8 Richter scale, followed by Tsunamies in many places.
Authorities don´t know exactly the number of people dead or lost jet.
I have lots of things to do has a hamradio operator by the days.
Basic servicies are still down, fortunally i have water and electricity. No internet jet, while i m writing from my ofice now.

Well my friend, take cara and thanks for your note.

Kind regards

Nelson

ce3llp@mi.cl

Hi Nelson,

I am glad to hear that you are ok, and you even can help in bad situation as HAM radio operator.


I hope that things will stabilize and regulate soon and bad things with earthquake and tsunamy will not repeat to worst situation.


If anything, in order to help you please communicate.


Good luck to you and your people my friend.

[epitopios]

FOR OUR INFORMATION

Simple infra-red detector

Hobby Circuit (http://olec.8k.com/circuit.htm) Next (http://olec.8k.com/Liquid%20Barometer.htm)
Summary of circuit features



Brief description of operation: Detects IR signals from TV remote controllers
Circuit protection: No special protection needed
Circuit complexity: Very simple and easy to build, no need for circuit board
Circuit performance: Not very good, detects IR remote controller signals nicely at 10 cm distance, also sensitive also to normal light and can't be used on bright light to detect IR remote controller signals
Availability of components: Original components might not be available everywhere, suitable components for modificantions
Design testing: Built quickly from the parts found on my lab, the first prototype was usable, few different photosensitive transistors tried
Applications: IR remote controller testing, detecting IR beam, testing of phototransistors
Power supply voltage: 9V battery
Power supply current: less than 1 mA on darkness, up to nearly 20 mA on bright light
Component cost: Few dollars

Circuit description

This circuit is a simple IR detector for testing IR remote controllers. The circuit is based on one phototransistor which receives the IR beam. The NPN transistor works as an amplifier which feeds current to the led. When this circuit detects IR or light, the LED is on. So you need to shield the phototransistor from ambient light if you don't want to do your tests in the dark. The best way is to fit the phototransistor in a small black tube. I used 2 cm long piece of insulating tube and fitted the phototransistor into the middle of the tube.
http://olec.8k.com/IR%20detector%20circuit_files/irdetect.gif (http://olec.8k.com/cgi-bin/i/IR%20detector%20circuit_files/irdetect.gif)
I built my circuit from components found in junk box. The values are not critical and you can substitute the phototransistor with other type. I have tried some other types as well, and the circuit works well with them also.
The circuit is designed to be a simple circuit to test IR remote controllers. The detecting range is typicallty in range of 10 cm to 1 meter depending on the components used and the strength of the IR source you try to detect.
Component list

Q1 BP109 (or similar phototransitor)
Q2 BC238C or BC547
D1 RED LED
R1 390 ohms 0.25W
Modification ideas

Almost any common NPN small signal transistor should work as Q2. If BC238 is not available BC547 or 2N2222 should work also. If you can not find original component model for Q1 you cna try almost any phototransistor for this (the circuit performance might vary but should work somehow with wide variety of phototransistors).
Other simple ideas to detect IR signal from remote control

If you own a video camera you can use it directly for viewing the IR signal from the remote control. Just point the remote control to the video camera and you sould see some flickering light in the video screen/viewfinder. This works because the CCD elements in the modern video cameras are also sensitive to IR radiation also. This ideas works with most of the video cameras but might fail on some (because some older cameras did not use CCD element and some new video cameras can have very good IR filtering in them).
I one day received a mail telling that you can also use any AM radio to detech the signals the IR remote controller sends. I tested a small AM radio (tuned to 530..1800 KHz band) with half dozen IR remote controllers and this idea really works. When you put the IR remote controller near the radio and point your IR remote control at the ferrite antenna of an AM radio, you should hear bleeping sounds from the radio when you activate the remote control. The AM radio does not detect the actual IR beam, but it will detect the electrical noise the IR remote controller generates when it operates.
I think that nose noises are form high current pulses sent to the IR LED when it transmits or the RFI from the controller IC inside the IR remote controller. The reason why AM radio picks up those well might be that IR remote controllers used in consumer products typically uses 455KHz ceramic crystal resonator as part of frequency synthesis circuit. 455KHz happens to be IF for the AM receivers. Remote generates about 40Khz carrier modulated with typically around 400uS-800uS square wave. You should be able to hear this square wave as between 1-3 kHz audio tone on radio tuned at anywhere in the AM band.

From : http://olec.8k.com/IR%20detector%20circuit.htm

friendly , epitopios

[nelson]

Hi Esteban and thanks for your time. Yes it was huge disaster here and we are still trying to help and recover from it.
So we whish we can fix all problems has soon has we can.
Take care and many thanks
Nelson



Hi Nelson!

Really big disaster occurs in Chile. I'm happy you can help the people.

Best regards

Esteban

[nelson]

THanks a lot WM6 for your words.
Yes we are aware of any help we can supply here.
Santiago have already 98% of basic services normalice.
The South of the country is recovering very slowly from the disaster.
In geneal, our constructions resisted well, considering the number of buildings and houses with no dameges.
We will talk later and thanks for your time and concern.
Take care and best regards

Nelson


Hi Nelson,

I am glad to hear that you are ok, and you even can help in bad situation as HAM radio operator.


I hope that things will stabilize and regulate soon and bad things with earthquake and tsunamy will not repeat to worst situation.


If anything, in order to help you please communicate.


Good luck to you and your people my friend.

[bilneo]

Hi all !!

i have some questions:

1/ can i use 12V supply for this device (bionic goldy)? is it better than 9V?

2/ can some one post the BCP please? list of component?

3/ what difference are there between building it in south or north hemisphere your are talking about ??



Many manyyy thanks and regards !!!! :)

BIL':rolleyes:

[nick_f]

Confirmed as the same results.
Heroine or not, he stay to be our hero anyway.

I understand, Hero from Heroine :cool:

Nicolae

[Funfinder]

@ WM6 ... i warned you...

Oh how funny... - WM6 how old are you? :lol: :razz:
Don't you have something better to do with your time?
Instead of serious research making fun out of lrl -
this is really so deft and childish that I wonder what
you're searching for in a technical forum! :( :( :(

[gps]

Dr. Best New Year free Gift to all:

http://i19.servimg.com/u/f19/14/09/85/82/bionic10.jpg
Dear WM6,

How can I make a bionic 01? I need this detector but it's very expensive!
Best regards.

[WM6]

Dear WM6,

How can I make a bionic 01? I need this detector but it's very expensive!
Best regards.



Read this topic from start. There are schematic, very simple and cheap, and a lot of explanation regarding building this device. If you are born dowser your success is guaranteed.

[gps]

Read this topic from start. There are schematic, very simple and cheap, and a lot of explanation regarding building this device. If you are born dowser your success is guaranteed.
Dear WM6,

Thank you very much for your fast reply. I'd like to ask you some details about this schematic. If you help me to make a bionic 01, I'll pay you. In fact I need all details to make a bionic 01. Please contact me through my email: nmr13c(at)gmail.com. I will be very happy if you answer my questions.


What are 741, BP109, P1-3?
How can I adjust this detector?
Is vacuum in the tubes?
what is under the contact lenses?
Can I detect hidden gold below the earth?

Best wishes,
gps

[WM6]

What are 741, BP109, P1-3?

741 - probably most known linear amplifier in the world, BP109 - phototransistor- can be replaced, ask your electronic parts dealer, P1-3 = pots (is this your first schematic?)

How can I adjust this detector?

Described in topic.

Is vacuum in the tubes?

If you need ionisation chamber then you use clean kerosene (petrol) or much better isooctane (C8H1) , cause vacuum cannot be ionised.

what is under the contact lenses?

read previous answer

Can I detect hidden gold below the earth?

Only if you are born dowser, otherwise, better to use metal detector.

!_!

[gps]

!_!
Dear WM6,

thank you very much. Yes it is my first schematic.

best regards

[expert]

hi every body itry to do this schematic but it didnt work
is this bcz
1-wrong schematic
2-distance betwen tube and laser
3- using(red laser pointer) not using infra red
4-or we are too slow to see the effect so we need digital signal proccing high speed

thanks alot

[WM6]

1-wrong schematic
2-distance betwen tube and laser
3- using(red laser pointer) not using infra red
4-or we are too slow to see the effect so we need digital signal proccing high speed



5- you are not born dowser, as you have to be, to successfully work with such devices.


Dowsing tool in dowser hands, no matter if it is out of wood or full of modern electronic, it is olways only utility means to an end approach of your inner dowsing capability.

Mean, there are not outer way to successfull dowsing (such as self-operating PD device), there are only inner way and different dowsing utilities as PD's are only tools to help your inner concentration on matter.

PD's cannot find nothing by itself.

[expert]

hallo every body i work from three days on this schamtic for bionic
it give me agood result but in sun shine in the night it doesnt work why what is the reason
is their asolution

thanks alot

[WM6]

Probably laser is to weak or sensor tube receive in wrong direction regarding reflected beam try and tune directivity first from vicinity 1 to 2 m.

[Morgan]

hallo every body i work from three days on this schamtic for bionic
it give me agood result but in sun shine in the night it doesnt work why what is the reason
is their asolution

thanks alot


Hello


In other thread you said cant put the BIONIC to work becouse something is wrong with schematic.
What corrections did you find in schematic?
What you found with this BIONIC,and distance?


Regards

[expert]

ok i do the schematic exactly
but i use resistor 200 ohm on the rgb led and i use lenses (glass one) with 3.75 correction
on gold rgb led well be off in sun shine only(you must Caliber very well)
thats all

[expert]

thank you wm6 i well try to but another laser pointer is the green one stable to work thanks

[WM6]

thank you wm6 i well try to but another laser pointer is the green one stable to work thanks



Green laser is one the best (of course it depend on how much mW we get out of it). There can be problem with directivity of sensor tube. Sensor have to be positioned in direction of reflected laser beam. Another problem is, if laser light wavelengt (color of laser light) does not correspond to fototransistor dedicated wavelenght (color light). Those two dedicated wavelenght have to correspond to each other.

[expert]

hallo wm6 itry a good laser pointer and agreen laser also and the sensor included the wave length which i use in laser but in night it doesnt work again what is proceduer to fix that

thanks

[WM6]

hallo wm6 itry a good laser pointer and agreen laser also and the sensor included the wave length which i use in laser but in night it doesnt work again what is proceduer to fix that

thanks


Try reflection from lower distance, say 1-2m first, and tune directivity of sensor. Directivity can be very delicate.

[expert]

hallo wm6 can you give me the destance between tubes and laser pointer and Diameter for the tube -if this be deffrent- and if i use 20 mw laser grean or red it is good or its not enough

thanks alot

[expert]

please ineed answer thanks alot

[WM6]

hallo wm6 can you give me the destance between tubes and laser pointer and Diameter for the tube -if this be deffrent- and if i use 20 mw laser grean or red it is good or its not enough

thanks alot

Hi expert,

distance isn't so much important, you can take distance given in schematic and description. More important is focusing, tube and laser have to to be set at the same focus point. So you need first to decide at which distance you wish to dowse most of the time. Say that your selected distance is 3m, then you need to focus your sensing tubes and laser at the same focusing point at 3m distance. Request some precise work with fixed laser ON and small movement of sensor tubing to get LED response. Once you get LED response you need to fix tube too. Try for test first from smaller distance, say 1m and after skilled this, go on your selected longer distance.

[toni_lxg]

Two-year of warranty and have been revised by OKM September 8, 2011 :)

link: http://annonces.ebay.fr/viewad/OKM-BIONIC-01-gold-detector-garantie-2ans/5045380798?bu=http%3A%2F%2Fshop.ebay.fr%2Fi.html%3 F_trksid%3Dp4939.m570.l1313%26_sacat%3DSee-All-Categories%26_from%3DR40%26LH_PrefLoc%3D0%26_nkw%3 Dbionic01

[MIJ]

The latest Bionic 1 how to use video?

http://www.youtube.com/watch?v=9QYYAeyGGto (http://www.youtube.com/watch?v=9QYYAeyGGto)

[Morgan]

The latest Bionic 1 how to use video?

http://www.youtube.com/watch?v=9QYYAeyGGto (http://www.youtube.com/watch?v=9QYYAeyGGto)

I have friends from germany who try the BIONIC-01,but they said it not work as LRL.

The guy with gold bar making the test is very convincing but i not believe,or i will heard good news from the treasure hunters using the BIONIC.

[J_Player]

The latest Bionic 1 how to use video?

http://www.youtube.com/watch?v=9QYYAeyGGto (http://www.youtube.com/watch?v=9QYYAeyGGto)Hi MIJ,

This thread is not about the Bionic 01 made by OKM.
This is a parody of their locator called the BOInic 01 Goldy with designs by WM6.
If you begin at the first post you will see he shows a locator circuit which uses an ingenious optical detection arrangement.
But you will not be able to locate buried treasure by building this circuit because it is only a parody.
You will find this thread is one of the most entertaining in the LRL forum, but it is not about the OKM Bionic 01.

If you want to know about the OKM Bionic 01, you can read a condensed summary of the Bionic 01 locator performance in another thread.
You will see OKM company is known to produce fake videos which do not show the actual performance you will find when you use the Bionic by yourself.
They are able to trick people because the Bionic 01 has a gradiometer in it which is able to detect some magnetic anomalies at limited range.
They use this short range detection to create the illusion and to convince you there is long range detection working through bionic/ionic signals.
You can build a gradiometer which works better for about £200, and nobody will try to fool you to think it performs better than a gradiometer.
Look at the reports from people who actually used the Bionic 01 for treasure hunting at the links I show in this summary:
http://www.longrangelocators.com/forums/showthread.php?p=136629#post=136629 (http://www.geotech1.com/forums/showthread.php?p=136629#post=136629)


There is also a complete thread for the bionic 01 if you want to read for a few hours or make posts about the Bionic 01:
http://www.longrangelocators.com/forums/showthread.php?t=16173

But don't forget to read through this parody thread for some very entertaining reading.


Best wishes, :)
J_P

[hung]

but i not believe,or i will heard good news from the treasure hunters using the BIONIC.

Now you can listen or... read.:lol:
http://www.okmmetaldetectors.com/metal-detector-finds/golden-rhyton-iran.php

I know of two treasure hunters who found gold with the Bionic 01. One of them found Inca gold artifacts.

But why should I give details, if you and some others will say you don't believe right?:lol:

[Morgan]

Now you can listen or... read.:lol:
http://www.okmmetaldetectors.com/metal-detector-finds/golden-rhyton-iran.php

I know of two treasure hunters who found gold with the Bionic 01. One of them found Inca gold artifacts.

But why should I give details, if you and some others will say you don't believe right?:lol:

Hi Hung,they can put what they want in the OKM site for propaganda,should we believe that story?

When i was visiting OKM,i have a look on the artefacts they have,claimed to be found with OKM devices,all RBF material...and the artefacts they said gifts from TH´s using OKM´s,all copy...

[Morgan]

Now you can listen or... read.:lol:
http://www.okmmetaldetectors.com/metal-detector-finds/golden-rhyton-iran.php

I know of two treasure hunters who found gold with the Bionic 01. One of them found Inca gold artifacts.

But why should I give details, if you and some others will say you don't believe right?:lol:

BTW : I know one person who paid 1500 E to rent the BIONIC-01 for one month.
This one a professional searcher from Germany(Bavaria) he learn very well how to balance this device,and make the final conclusions ,that not work LRL.
REPORT : can be erratic and most of the times inconclusive.

during one month using this device in good places he find NOTHING

[WM6]

This one a professional searcher from Germany(Bavaria) he learn very well how to balance this device,and make the final conclusions ,that not work LRL.



OKM Bionic can be used as electronic dowsing rod only.

OKM Bionic is electronic dowsing rod with poorly-conceived-design, because one one of the most important elements of the dowsing rod is to maintain direct contact of dowser body with the dowsing rod core functionality. In case of Bionic this touch is lost, so we can expect that it can work worst than usual wooden or metallic dowsing rod.