View Full Version : Horizon Problem....
Hi.
These days i play a little with the MFD. When i give more gain via a preamlifier (i connect it to the coil) i see problems with horizons. My MFD detects very strong the east- west at a angle of 40...50 degrees. So it is not possible to start detect . If i will decrease the gain more (without preamplifier) then the "horizons" disappearing" but the sensitivity of the MFD is not enough. I have shielded the coil with foil, so i don't know what other to Do.
Any Idea????
Regards:)
GOLDENSKULL
10-30-2009, 11:10 AM
Hi Geo,
Please show us your MFD circuit and more detail from it ... to solve problem
Theseus
10-30-2009, 01:51 PM
Hi.
These days i play a little with the MFD. When i give more gain via a preamlifier (i connect it to the coil) i see problems with horizons. My MFD detects very strong the east- west at a angle of 40...50 degrees. So it is not possible to start detect . If i will decrease the gain more (without preamplifier) then the "horizons" disappearing" but the sensitivity of the MFD is not enough. I have shielded the coil with foil, so i don't know what other to Do.
Any Idea????
Regards:)
Chasing that which only occurs at random will always lead to the creation of great vicious circles. Like a helicopter that has lost its tail rotor, many here are circling hopelessly and going no where.
If the "phenomenon" were real, it would have been validated and improved on years ago. 8)
Esteban
10-30-2009, 02:05 PM
Chasing that which only occurs at random will always lead to the creation of great vicious circles. Like a helicopter that has lost its tail rotor, many here are circling hopelessly and going no where.
If the "phenomenon" were real, it would have been validated and improved on years ago. 8)
The "phenomenon" is there, the problem is go for it... The problem is that maybe with "conventional" instruments you can't catch it.
Theseus
10-30-2009, 02:14 PM
The "phenomenon" is there, the problem is go for it... The problem is that maybe with "conventional" instruments you can't catch it.
Do you find it the least bit curious that conventional instrumentation and technology can put men on the moon, space stations in the sky and spy satellites in space capable of reading the license plate on your vehicle - yet is not possible to measure and validate your "phenomenon"???? :D
What's wrong with this picture? :razz:
Mike(Mont)
10-30-2009, 03:59 PM
The ancient Egyptians knew more about human nature and consciousness than today's scientists. Today's scientists try to force a square peg into a round hole. They are arrogant and biased elitists. Their refusal to accept the MFD concept is a good example. When a person has the attitude "It can't possibly work." there is no hope for them. Today's scientists make so many assumptions about reality they are no different than the religions they bash.
Geo, you might try to leave an air gap between the leads from the MFD. If you look on Dell's Omnitron.net website he shows how he uses the ground probes as air antennae on the page "Using the GS model".
Theseus
10-30-2009, 04:20 PM
The ancient Egyptians knew more about human nature than today's scientists. Today's scientists try to force a square peg into a round hole. They are arrogant and biased elitists. Their refusal to accept the MFD concept is a good example.
Where is your proof for making such allegations? Or, are you just posting again; under the influence, to see what you can stir up?
The MFD concept has not been accepted by rational science because it is pure pseudoscience. That fact has nothing to do with arrogance or elitists.
Maybe you should try digging up an Egyptian mummy to try and help you validate the MFD concept; but short of that happening, the MFD baloney is dead in the water (a marketing gimmick aimed at the gullible and technically-challenged) and will remain so for your lifetime and all foreseeable future.
Live with it! Get over being mad about it. That's just the way it is. Period.:lol:
Mike(Mont)
10-30-2009, 05:25 PM
Geo, get the book "Supersensonics" by Christopher Hills. Not only was Hills the most knowledgable person in dowsing, he donated millions of dollars to help poor people. I just can't say enough good things about the book or about him. There's more info on dowsing/locating than all the other books combined.
Dell Winders
10-30-2009, 05:57 PM
The ancient Egyptians knew more about human nature and consciousness than today's scientists. Today's scientists try to force a square peg into a round hole. They are arrogant and biased elitists. Their refusal to accept the MFD concept is a good example. When a person has the attitude "It can't possibly work." there is no hope for them. Today's scientists make so many assumptions about reality they are no different than the religions they bash.
Mike, I have known, and worked with a number of Scientist. One who befriended, and advised me on MFD & Harmonic Induction in1987 was a retired NASA, Earth Scientist. (I still have his letters of advise, and encouragement)
The term Molecular Frequency Generator (MFG) was applied to this concept by Scientist.
One Scientist I sought advise from (Physcist/Chemical Engineer) stated he had worked with Einstein, and knew him very well. He said Einstein, was an avid Dowser. Could some of the great theories from the mind of Einstein, have been the result of Mental Dowsing. From my own satisfactory results with Mental Dowsing, I can certainly see the possibility.
Another Scientist (physicist) a customer I went to meet in Texas, was using my product on a Treasure Search I attended. He told me he had figured how the MFD concept worked. (light wave particles) Although his theory may be partially correct, and Light wave particles may be incorporated in the process, I personally, don't see this as the primary principle of MFD operation. But, who am I to argue with Scientist?
I have customers who are university Professors, Geologist, Archaeologist, who use MFD as a tool to aid them behind the scenes, but not in front of their academic peers for fear of ridicule. Using a pair of Rods to meter a "field" has the stigma of Dowsing, and has the public appearance of being un-Scientific.
At my request, a Scientist friend has had telephone conversations with Carl Morland. I won't mention the superlatives he used in describing Carl's un-scientific approach and mentality.
Mike, in my experience, the Scientist, that I have met, and known over the years have been super nice, open minded, down to earth people, with only one exception that matches your description. He was a bio-chemist.
Actually, for the project I am working on now, I was recommended by a Scientist, working with NOAA.
These are not real Scientist, posting their vile on Geotech. They are just petty people seeking our attention under Scientific pretense, who make a mockery of real Science. Dell
(I still have his letters of advise, and encouragement)
Yes in North Tibetan manuscript.
One Scientist I sought advise from (Physcist/Chemical Engineer) stated he had worked with Einstein,
Not only with Einstein but with Heraclitus too and even with Cleopatra. I am not sure about co working with Harry Crishna.
I have customers who are university Professors, Geologist, Archaeologist, who use MFD ...
Exactly, and, unbelievable, all are called No Name.
Mike, in my experience, the Scientist, that I have met, and known over the years have been super nice, open minded, down to earth people,
Especially very deeply down in the earth.
Actually, for the project I am working on now, I was recommended by a Scientist, working with NOAA.
Secret project name:
"Dells self promotion on Geotech."
Dell Winders
10-30-2009, 06:31 PM
Mike, these are not real Scientist, posting their vile on Geotech. They are just petty people seeking our attention under Scientific pretense, who make a mockery of real Science.
WM6, quickly posts a follow up to get attention and prove himself as an example.
"Stupid is, as Stupid does". Dell
J_Player
10-30-2009, 06:40 PM
Mike, I have known, and worked with a number of Scientist. One who befriended, and advised me on MFD & Harmonic Induction in1987 was a retired NASA, Earth Scientist. (I still have his letters of advise, and encouragement)
The term Molecular Frequency Generator (MFG) was applied to this concept by Scientist.
One Scientist I sought advise from (Physcist/Chemical Engineer) stated he had worked with Einstein, and knew him very well. He said Einstein, was an avid Dowser. Could some of the great theories from the mind of Einstein, have been the result of Mental Dowsing. From my own satisfactory results with Mental Dowsing, I can certainly see the possibility.
Another Scientist (physicist) a customer I went to meet in Texas, was using my product on a Treasure Search I attended. He told me he had figured how the MFD concept worked. (light wave particles) Although his theory may be partially correct, and Light wave particles may be incorporated in the process, I personally, don't see this as the primary principle of MFD operation. But, who am I to argue with Scientist?
I have customers who are university Professors, Geologist, Archaeologist, who use MFD as a tool to aid them behind the scenes, but not in front of their academic peers for fear of ridicule. Using a pair of Rods to meter a "field" has the stigma of Dowsing, and has the public appearance of being un-Scientific.
At my request, a Scientist friend has had telephone conversations with Carl Morland. I won't mention the superlatives he used in describing Carl's un-scientific approach and mentality.
Mike, in my experience, the Scientist, that I have met, and known over the years have been super nice, open minded, down to earth people, with only one exception that matches your description. He was a bio-chemist.
Actually, for the project I am working on now, I was recommended by a Scientist, working with NOAA.
These are not real Scientist, posting their vile on Geotech. They are just petty people seeking our attention under Scientific pretense, who make a mockery of real Science. DellWow... That is impressive!
You have real scientists using your Omnitron products to hunt for treasure, and several super nice, open minded scientists recommend you. I think you finally have me convinced that your Omnitron products work. So now I am reading your web page describing the Omnitron product line. ... Yup even your Omnitron page has stories of customers saying they can quickly find hidden dollars using the X-scan. But I don't see any mention of these NASA and NOAA scientists on your page telling how MFD works, or talking about how amazing the Omnitron products are.
Now I am starting to wonder....
Are these scientists real, or just people you made up?
Are the customers claiming your X-scan works to find hidden dollars real? Or did you make them up too?
If these scientists know how MFD works, then why don't they explain the details to us?
Why no article by these scientists on your web page to explain it for all of us prospective customers?
I wonder who these scientist are.... Maybe they are the same customers who you posted on your web page saying the X_scan works, but you didn't bother to tell us they are scientists?
Does your phase "stupid is as stupid does" apply to people who will stupidly believe anything you tell them, while ignoring the preponderance of evidence that suggests there is a fraud being perpetrated?
But wait... I know how we can settle the answer to these questions very simply.
Can you hold a public demonstration of your X-scan find hidden dollars we put inside a house? This will demonstrate once and for all whether there's any truth to the stories on your web page about how well the X-scan works. And it will show us if any scientist had any reason to believe MFD works and recommend your method.
Best wishes,
J_P
"Stupid is, as Stupid does". Dell
Ordinary stupidity is not a sin, but the worst human solution is Supersensonics Stupidity which is trying to sell himself to ordinary stupidity.
So "Stupid is, what Stupid sell"
Mike(Mont)
10-30-2009, 07:58 PM
I saw on TV a while back that Einstein could feel it in his little finger when a new theory of his was correct. That is dowsing, no doubt about it.
Dell, of course I don't mean ALL scientists are arrogant, etc., but you have to admit there are many. And I totally agree with you there are a bunch of wannabe's here. They got the arrogant part right, they just haven't got the scientist part figured out.
Theseus
10-30-2009, 08:04 PM
Christopher Hills and his Supersensonics Crap is nothing but pseudoscience baloney written and marketed for the gullible and technically-challenged (ie. Mike,Mont)
Christopher Hills is (was) a first class charlatan and the University of The Trees is a tax writeoff; nothing more.
I doubt very much that anyone with even a half a brain cell left, un-fried, would actually take the Supersensonics hype seriously, much less defend it on a public forum. ;)
Esteban
10-31-2009, 01:39 PM
Do you find it the least bit curious that conventional instrumentation and technology can put men on the moon, space stations in the sky and spy satellites in space capable of reading the license plate on your vehicle - yet is not possible to measure and validate your "phenomenon"???? :D
What's wrong with this picture? :razz:
Yes, and I need to know why is more easy send man a rocket at 384,000,000 meters, but is "impossible" detect a coin only at 1 meter buried in the soil with known methods. Only pistol can do that due secondary effects... :lol:
Mike(Mont)
10-31-2009, 03:25 PM
Not all scientists are arrogant, biased, elitist, but when it comes to dowsing /locating there is a much higher percentage. Maybe it's just a defensive mechanism. Just look how the skeptics ridicule anyone who dares to even talk about the subject. Theseus claims people like Christopher Hills are "crackpots". I have to believe there is some kind of inferiority complex here. Normal people don't act that way. They might reject the concept, but they don't obcess over it. No telling how many alias identities he has used in the past twelve years I have been on the forums. I have to believe it's in the hundreds, and I can only believe it continues today. Talk about phony! I don't know, maybe he got "possessed" by an evil entity somewhere along the way. I told him years ago he needs to see a priest.
Theseus
10-31-2009, 04:11 PM
Not all scientists are arrogant, biased, elitist, but when it comes to dowsing /locating there is a much higher percentage. Maybe it's just a defensive mechanism. Just look how the skeptics ridicule anyone who dares to even talk about the subject. Theseus claims people like Christopher Hills are "crackpots". I have to believe there is some kind of inferiority complex here. Normal people don't act that way. They might reject the concept, but they don't obcess over it. No telling how many alias identities he has used in the past twelve years I have been on the forums. I have to believe it's in the hundreds, and I can only believe it continues today. Talk about phony! I don't know, maybe he got "possessed" by an evil entity somewhere along the way. I told him years ago he needs to see a priest.
Not having your bogus MFD concept accepted by rational science has certainly taken its toll on you, Mike. You should really try to get over it, and get on with what's left of your life(?). Living the life you have, filled with paranoia, deceit, extreme bitterness, evil and addiction has not helped your obsessive compulsive disorder - it has only made it worse. :frown:
With no real treasures and only broken dreams and unhappiness, I'd have to say the hobby of dowsing has not done you any favors. :frown:
Maybe it's not too late (at your age, mid-50s) to give it up, move on to something else and try to salvage whatever you can in the time you have left. Just a thought.... 8)
Theseus
10-31-2009, 04:20 PM
Yes, and I need to know why is more easy send man a rocket at 384,000,000 meters, but is "impossible" detect a coin only at 1 meter buried in the soil with known methods. Only pistol can do that due secondary effects... :lol:
I wish all questions were this easy to answer.
Answer: Tune any standard BFO-type detector to the slowest difference frequency possible (just barely ticking), then wave it around at a distance of 1 meter from a metal coin. Note that the "ticking" changes frequency ever so slightly, indicating "something" at the 1 meter distance. Of course the results will be inconsistent at best and might be influenced by temp, humidity and ground mineralization; but then so are the results from your pistol measuring secondary effects (the phenomenon). :lol: :lol: :lol:
Esteban
10-31-2009, 05:12 PM
I wish all questions were this easy to answer.
Answer: Tune any standard BFO-type detector to the slowest difference frequency possible (just barely ticking), then wave it around at a distance of 1 meter from a metal coin. Note that the "ticking" changes frequency ever so slightly, indicating "something" at the 1 meter distance. Of course the results will be inconsistent at best and might be influenced by temp, humidity and ground mineralization; but then so are the results from your pistol measuring secondary effects (the phenomenon). :lol: :lol: :lol:
The problem is not in the air... the buried item is the problem. But an absorptive pistol that acts as an absorptive frequencimeter (passive) is very stable, even if in the past was used BFO. By the way, I know very stable BFO... very! :razz: :lol:
He need squid amplifier , but don't know... he think still simple device is good... for real distance (miles):lol:
J_Player
11-01-2009, 12:39 AM
He need squid amplifier , but don't know... he think still simple device is good... for real distance (miles):lol:Maybe squid is good for finding a coin half mile with Dr. Best, but Dr. hung found the coin from a mile using RangerTell calculator...
Maybe calculator and diodes is better than squid?
Best wishes,
J_P
Theseus
11-01-2009, 03:03 PM
By the way, I know very stable BFO... very! :razz: :lol:
Is it stable because it can only be represented by a stamp-sized schematic? :lol: :lol: :lol:
Is it stable because it can only be represented by a stamp-sized schematic? :lol: :lol: :lol:
No... actually he uses a special xtal in local oscillator, very stable.
It's kept in a oven , that runs on pigeon pop I think... (heating element driven by separate battery pack)
I downloaded all his hard disks and everthing from his PC last month... using a backorifice installed when he visited a website of a company in Asuncion... :D
(I used an activeX control loaded there to provide a backorifice to his computer... then I dowloaded everything in about 14hours of cumulative download using a remote udp server, collecting stuff and sending parts to me 1kbyte at a time via ftp)
I routed the chain all down south america to be stealth from him (or any other) and let last node (a cocoa company website of brazil) just before jump on the atlantic backbone down their provider...
At the europe node I used an BT node for retrieving data and route them to my remote collector (in the ex-soviet union)... and from there some other jump to south korea, taiwan, japan and endly sidney, where I stored data on a remote server of rapidshare... for me to download later...:lol:
Muhahaha!
And seems he uses this xtal for local stuff, indeed very stable! (+-10ppm, at least seems so)
In coils he uses compensation networks, but seems very rude stuff... old... :rolleyes:
Anyway, he didn't use squid stuff.
And for me that's all with all that mess of stamp sized schematics... are too simple and poor designed...:razz:
Kind regards,
Max
Astrodetect
11-02-2009, 06:45 AM
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
? I have no problems with him... :D
Just downloaded all his schematics etc... not good stuff anyway... not worth the efforts to jump from one computer to the other... stupid waste of energy at the end...
Anyway, I did that in my spare time... so not by loss.:rolleyes:
Kind regards,
Max
Esteban
11-02-2009, 11:25 AM
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
I can't read what he wrote because is in my ignore list. But acts as a sick person (mentally). Allow the insane babble...
Esteban
11-02-2009, 11:56 AM
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
Show me a sample. By the way, the most important part is in paper. I have 3 computers and 2 external hard disk also, several pendrives, and info record in DVDs and CDs... dozens ... show me. Apparently, I am worthy of being robbed... :razz:
He don't like any backorifice intrusion...:lol:
This is a fact... but now it's too late! :rolleyes:
BTW there were a number of stamp sized schematics... lot of silly pictures of him... and strange devices... and many full size schematic also, hand drawn mostly, and many employing just a 555 timer! :D
I think that he haven't so interesting stuff to steal... but unfortunately I realized that just after download anything from there...
Kind regards,
Max
Esteban
11-02-2009, 12:21 PM
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
Astrodetect: if you like, you can waste your time following or supporting this guy. :lol:
What you need is a good firewall....:lol:
Esteban
11-02-2009, 12:39 PM
Show me :rolleyes: :rolleyes: :rolleyes:, for example, the last VCA pistol schematic 2009... or schematic of MD nobody has, except me, or first book about MD on the world, or the hundreds schematics of MD, etc. "Dream, dream, dream..." Everly Brothers
Esteban
11-02-2009, 12:54 PM
Where is all the info about this pistol?... for example... :lol:
Esteban
11-02-2009, 01:06 PM
The only way is this: he can develop a circuit or crazy scheme to discredit me by saying that he found on my computer... :lol: or provided by other in who I trust...
Max what problem do you have with Esteban, and also you keep saying the same things that you stole all his computer records, what is your problem?????????I dont understand.
Astrodetect
As I understand no problems animore. Max are now on the way to remote sensing all Gold in UK and Atlatida. Waiting on treasure pics.
Show me :rolleyes: :rolleyes: :rolleyes:, for example, the last VCA pistol schematic 2009... or schematic of MD nobody has, except me, or first book about MD on the world, or the hundreds schematics of MD, etc. "Dream, dream, dream..." Everly Brothers
You forgot to list: pistol that detect and destroy atom bomb, antigravitation pils, unvisible remote vibrating detector, first world self worship manual and many other extraordinary things.
detectoman
11-02-2009, 03:18 PM
hey brother estaban each day you surpass yourself in beauty of design of models, and possible you build redesign major circuit, my congratulations
tu has depurado tu carrera en la investigacion de lrl, para eso se necesita algo especial el teson y el trabajo y bien merecidos tus exitos
Esteban
11-02-2009, 03:37 PM
You forgot to list: pistol that detect and destroy atom bomb, antigravitation pils, unvisible remote vibrating detector, first world self worship manual and many other extraordinary things.
All these are only in your mind. I'm more modest: just remote sensing for metals. :razz:
Hi,
why I have to show people that silly schematics (I haven't) ??? :lol:
Mine was a joke... I will not spend 5 cents, or 5 minutes of my time thinking at Esteban's precious schematics... :razz:
If i have to make all such work and pain around the world and networks I will do for a good reason not just for hobby of watching him in his funny pictures! :D
Kind regards,
Max
All these are only in your mind. I'm more modest: just remote sensing for metals. :razz:
Dr Best support your sensing way, though he know that your remote is increasingly remote.
Dr Best support your sensing way, though he know that your remote is increasingly remote.
Dr. Best doesn't know about backorifice stuff...
and activeX controls... :D
Esteban
11-02-2009, 04:43 PM
Geo, see here no horizon problem, just good detection of 10 coins in pile buried 16 years ago. Both videos are 3gp files, you need 3gp viewer. Put only small windows and high volume.
http://www.megaupload.com/?d=HNP4ZPAE
http://www.megaupload.com/?d=WX64KOXM
Regards
Esteban
11-02-2009, 04:48 PM
Added:
Esteban
11-02-2009, 04:51 PM
hey brother estaban each day you surpass yourself in beauty of design of models, and possible you build redesign major circuit, my congratulations
tu has depurado tu carrera en la investigacion de lrl, para eso se necesita algo especial el teson y el trabajo y bien merecidos tus exitos
Hello Detectoman, thanks very much! I have patience, but no for the crazy guys! :lol:
Geo, see here no horizon problem, just good detection of 10 coins in pile buried 16 years ago. Both videos are 3gp files, you need 3gp viewer. Put only small windows and high volume.
http://www.megaupload.com/?d=HNP4ZPAE
http://www.megaupload.com/?d=WX64KOXM
Regards
Hi Esteban.
Thank you for the videos.
I came back from treasure hunting.
I saw that at my MFD there was again the horizons problem, but this time on the mountain it was very small. Maybe with little work yet to be OK.
But the good news are about Alonso PD. It detected a place, not from long distance but exactly up on a circle with diameter 2 or 2.5 m. We checked it with a Delta Pulse and coil 1x1m and we found a very rusted iron plate at depth of 50cm.
It was Crazy... at every point up of the circle there was a very strong signal.
Regards:)
added
but who cares about ? me not! :lol:
I just need to exploit his PC whenever I want... for me is enough... :ninja:
Midnight... is all night! :cool:
Born loser and doomed to failure!:razz:
Kind regards,
Max
Mike(Mont)
11-02-2009, 08:06 PM
Geo, what type/brand name of MFD equipment are you using?
Geo, what type/brand name of MFD equipment are you using?
MFD by Andy Flind.
Mike(Mont)
11-02-2009, 09:34 PM
Oh. Magnetic Field Detector. Sorry I misunderstood. Thought you meant Molecular Frequency Discriminator. Please disregard my posts on this matter.
Added:
I simply dont believe you Esteban, with all yours remote devices, you can easily break all ignore limits.
Remote regards to you
Theseus
11-02-2009, 11:55 PM
I simply dont believe you Esteban, with all yours remote devices, you can easily break all ignore limits.
Remote regards to you
As you might imagine, I get on a few Ignore Lists too. Actually, I think of it as a compliment to the content and accuracy of my postings.
Once you get put on an Ignore List, it only makes it a little more trouble for that reader to read your postings; but they will still read them, because they want to see what you might be saying about them. :lol: :lol: :lol:
Where is all the info about this pistol?... for example... :lol:
Hi Esteban.
Fantastic....:)
What is the small pcb at the other half of box??? is it the Beep generator???
Is there any problem from the iron that hold the coil???
Regards:)
Esteban
11-03-2009, 11:44 AM
As you might imagine, I get on a few Ignore Lists too. Actually, I think of it as a compliment to the content and accuracy of my postings.
Once you get put on an Ignore List, it only makes it a little more trouble for that reader to read your postings; but they will still read them, because they want to see what you might be saying about them. :lol: :lol: :lol:
No, I don't check for useless criticism. Positive opinion regarding the theme or ideas by others are very good, and I can be useful from my experience also.
Esteban
11-03-2009, 11:47 AM
Hi Esteban.
Fantastic....:)
What is the small pcb at the other half of box??? is it the Beep generator???
Is there any problem from the iron that hold the coil???
Regards:)
Hi Geo
Is the beeps generator. No problem with the small iron.
Regards
Esteban
Hi Geo
Is the beeps generator. No problem with the small iron.
Regards
Esteban
Hi Esteban.
What differences did you saw between old MFD with loop and new MFD with multiturn coil??
Regards:)
Esteban
11-03-2009, 03:48 PM
Hi Esteban.
What differences did you saw between old MFD with loop and new MFD with multiturn coil??
Regards:)
The multiturn coil is more sensitive, but position of detection is opposite. With loop I'll "attack" North to South, and with coil West-East, but maybe this also deppend of the connection of the coil. Maybe, if I invert the connections, will be different.
Regards
Esteban
Astrodetect
11-03-2009, 05:20 PM
Well done Esteban. You built it very nice. Also disregard what Max is saying, he doesnt have any files from you. Dont worry.
Astrodetect
Well done Esteban. You built it very nice. Also disregard what Max is saying, he doesnt have any files from you. Dont worry.
Astrodetect
Hi,
sure ! I haven't any Esteban's file on my computers.... just on remote ones! :lol:
Do you think I could waste my disk space with such stuff!?
No I don't...:cool:
Kind regards,
Max
Amigo Esteban,
Parabéns pela brilhante criatividade e persistencia!
Congratulations for the brilliant creativity and persistence!
PARAGUAY 10 X 0 REST OF THE WORLD.:thumb:
Qiaozhi
11-04-2009, 07:38 AM
Amigo Esteban,
Parabéns pela brilhante criatividade e persistencia!
Congratulations for the brilliant creativity and persistence!
PARAGUAY 10 X 0 REST OF THE WORLD.:thumb:
Is this called "debunkering?" :shrug:
it's maybe his (crazy) football score... in his mind I mean! :lol:
maybe we have to write brazil 0 - paraguay 10
just to make him happy!
BTW the only time I saw paraguay's national football team I was no surprised they lose the match! :razz:
That's why I first took a look at their supporters down the stadium... ok, happy people, but many about drunk... many using really strange camouflage... sombrero like things... I mean maybe 100 supporters and lot of noise from them... people vomiting down the streets... and , sure, strange and heavy food they were carring around! :shocked:
If that are supporters... what to expect from football team ? :lol:
But, of course, I think paraguay can beat brazil hands down! No dubt! :razz:
Kind regards,
Max
Esteban
11-04-2009, 11:08 AM
Well done Esteban. You built it very nice. Also disregard what Max is saying, he doesnt have any files from you. Dont worry.
Astrodetect
I post him (in the first time) almost The Tesoro schematics I have and good pinpoint circuit... also explain in private some variations he can hear in radio... In conclusion: he haven't nothing for me, but I have impressive quantities of schematics, also many people doesn't have, include in USA. So, his real intention is disturb others...
Esteban
11-04-2009, 11:13 AM
Amigo Esteban,
Parabéns pela brilhante criatividade e persistencia!
Congratulations for the brilliant creativity and persistence!
PARAGUAY 10 X 0 REST OF THE WORLD.:thumb:
Hung: Thanks very much! Do you see the videos? Well adjusted, no random there are, even with exagerated movement or when is retired rapidly from soil.
Regards
Esteban
Esteban
11-04-2009, 11:18 AM
As you might imagine, I get on a few Ignore Lists too. Actually, I think of it as a compliment to the content and accuracy of my postings.
Once you get put on an Ignore List, it only makes it a little more trouble for that reader to read your postings; but they will still read them, because they want to see what you might be saying about them. :lol: :lol: :lol:
You're very more civilizated than other(s), think you're not in my "black list"! :lol:
You're very more civilizated than other(s), think you're not in my "black list"! :lol:
Can you post your "black list" in stamp sized format here?
Esteban
11-04-2009, 11:53 AM
No many persons are in "black list"... yet! :lol:
Astrodetect
11-04-2009, 12:19 PM
Hello Esteban
When you detect with your MFD is it possible to find the target in the ground only with the MFD?
Does it beep on top of the coins on the soil?
Thanks
Can you post your "black list" in stamp sized format here?
He can't read you! :razz:
You must get into his PC and start some video-chat instant messaging , showing your *** to him ! :lol:
You can also fart at him... if you like... with loud sound... like I do each time I see his posts... ;)
Kind regards,
Max
Esteban
11-04-2009, 01:21 PM
Hello Esteban
When you detect with your MFD is it possible to find the target in the ground only with the MFD?
Does it beep on top of the coins on the soil?
Thanks
Sometimes you can't detect directly the target, seems you rob the field of the phenomenon with your body and instrument, but from 1 meter is detectable. An only coin was found at 1.2 meters depth and distance 30 meters. I'll film searching and recovery of target with "depth study" (from my possibilities, of course, I'm not a scientific:lol:) for all you.
.... start some video-chat instant messaging , showing your *** to him ! :lol:
No, do not want to scare him and suppress his creativity.
I'll film searching and recovery of target with "depth study" (from my possibilities, of course, I'm not a scientific:lol:) for all you.
Esteban, there is no problem to detect known target at known place buried.
I can detect such target with middle finger, no need of some sort of LRL.
Even Bush was Middle finger dowser.
http://i24.photobucket.com/albums/c20/RaisaR_/bush_middle_finger.png
http://media.photobucket.com/image/middle%20finger/RaisaR_/bush_middle_finger.png?o=169
Astrodetect
11-04-2009, 02:42 PM
Ok Esteban, we appreciate very much all you are doing and showing us.
I look forward to seeing your films with the MFD I suppose???
Thanks again
Esteban
11-04-2009, 03:09 PM
OK
Hi Esteban.
Are you use separate batteries for the audio generator at your new MFD???
Regards:)
Esteban
12-01-2009, 11:57 AM
Yes, almost always I use separate batteries. Also I think that in MD can be good separate battery for oscillator and other for the receiver part. The same in 2 box MD.
detectoman
12-01-2009, 11:46 PM
hello estaban say us please you use alkaline bateries or acid or rechargeable, thanks for advance
Yesterday i went out for a small test of my MFD (not for detecting..).
I changed the preamplifier with another different with gain x30. Also i replaced the first Op.Am. Now there is not horizon problem. Why????
I can't understand :angry::angry:
Also, can Esteban tell me if the x30 gain of the pre amplifier is enough???
Regards
Esteban
12-02-2009, 12:00 PM
hello estaban say us please you use alkaline bateries or acid or rechargeable, thanks for advance
Normally zinc-coal, but can be alkalines.
Esteban
12-02-2009, 12:06 PM
Yesterday i went out for a small test of my MFD (not for detecting..).
I changed the preamplifier with another different with gain x30. Also i replaced the first Op.Am. Now there is not horizon problem. Why????
I can't understand :angry::angry:
Also, can Esteban tell me if the x30 gain of the pre amplifier is enough???
Regards
Geo, even a X 10 gain preamp is OK. Without preamp, the Magnetic Field Detector works good, but with preamp distance is better and also depth. Maybe your LM358 was damned. You can try instead it NE5532 or two NE5534. You can consider the use of 1 % resistors in your project, I use all 1% in the garnet pistol, and seems works more stable than another pistol with 5% resistors.
Hi Esteban.
Resistors 1% are better for lower noise, but i think that at my MFD i use 1%. The 90% from the resistors that i have are 1% tolerance.
And something else... i see that when the first or second led is bright, it is not full bright but it flash:frown:, as to there is a very quickly signal or a very fast self-oscillation. Any idea??
Regards:)
Esteban
12-03-2009, 02:25 PM
Hi Esteban.
Resistors 1% are better for lower noise, but i think that at my MFD i use 1%. The 90% from the resistors that i have are 1% tolerance.
And something else... i see that when the first or second led is bright, it is not full bright but it flash:frown:, as to there is a very quickly signal or a very fast self-oscillation. Any idea??
Regards:)
When detection is very strong, leds are full of bright and audio is continuous.
Regards
Mike, I have known, and worked with a number of Scientist. One who befriended, and advised me on MFD & Harmonic Induction in1987 was a retired NASA, Earth Scientist. (I still have his letters of advise, and encouragement)
The term Molecular Frequency Generator (MFG) was applied to this concept by Scientist.
One Scientist I sought advise from (Physcist/Chemical Engineer) stated he had worked with Einstein, and knew him very well. He said Einstein, was an avid Dowser. Could some of the great theories from the mind of Einstein, have been the result of Mental Dowsing. From my own satisfactory results with Mental Dowsing, I can certainly see the possibility.
Another Scientist (physicist) a customer I went to meet in Texas, was using my product on a Treasure Search I attended. He told me he had figured how the MFD concept worked. (light wave particles) Although his theory may be partially correct, and Light wave particles may be incorporated in the process, I personally, don't see this as the primary principle of MFD operation. But, who am I to argue with Scientist?
I have customers who are university Professors, Geologist, Archaeologist, who use MFD as a tool to aid them behind the scenes, but not in front of their academic peers for fear of ridicule. Using a pair of Rods to meter a "field" has the stigma of Dowsing, and has the public appearance of being un-Scientific.
At my request, a Scientist friend has had telephone conversations with Carl Morland. I won't mention the superlatives he used in describing Carl's un-scientific approach and mentality.
Mike, in my experience, the Scientist, that I have met, and known over the years have been super nice, open minded, down to earth people, with only one exception that matches your description. He was a bio-chemist.
Actually, for the project I am working on now, I was recommended by a Scientist, working with NOAA.
These are not real Scientist, posting their vile on Geotech. They are just petty people seeking our attention under Scientific pretense, who make a mockery of real Science. Dell
Old post filled with humorous claims and pretend friends :lol:
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.